Viewing Cluster Activity Logged Messages
The Cluster Manager logs all actions performed on the Media Components. You can view the logged messages in the Web interface of the Cluster Manager.
|
➢
|
To view logged messages: |
|
■
|
Open the Cluster Log page (Setup menu > IP Network tab > Media Cluster folder > Cluster Log). |
The logged messages are displayed in the following syntax: <time action was logged in hh:mm:ss format> <Media Component ID and name ("MC#") or Cluster Manager ("CM")> <message description>
The table below lists the messages generated per action type. The messages of each action type are listed in chronological order.
Logged Messages
|
|
Adding Media Component
|
|
■
|
"<Time> MC#<ID> <Name>: Added by Administrator (OAMP IP: 10.4.219.10)" |
|
■
|
"<Time> MC#<ID> <Name>: Waiting for connection establishment" |
|
■
|
"<Time> MC#<ID> <Name>: Connection was established successfully, version - <version>" |
|
■
|
"<Time> MC#<ID> <Name>: SW upgrade is required, loading new version - <version>" |
|
■
|
"<Time> MC#<ID> <Name>: Loading DSP tones file" |
|
■
|
"<Time> MC#<ID> <Name>: Reset performed by the Cluster Manager" |
|
■
|
"<Time> MC#<ID> <Name>: Waiting for connection establishment" |
|
■
|
"<Time> MC#<ID> <Name>: Connection was established successfully, version - <version>" |
|
Locking Media Component
|
|
■
|
"<Time> MC#<ID> <Name>: Locked by the Administrator" |
|
■
|
"<Time> MC#<ID> <Name>: Blocked from new DSP resource allocations" |
|
■
|
"<Time> MC#<ID> <Name>: All DSP resources were released" |
|
Unlocking Media Component
|
"<Time> MC#<ID> <Name>: Unlocked by the Administrator"
|
Removing Media Component (after being Locked)
|
"<Time> MC#<ID> <Name>: Removed from the Media Components table by the Administrator"
|
Restarting Media Component
|
|
■
|
"<Time> MC#<ID> <Name>: Reset request by the Administrator" |
|
■
|
"<Time> MC#<ID> <Name>: Blocked from new DSP resource allocations" |
|
■
|
"<Time> MC#<ID> <Name>: All DSP resources were released" |
|
■
|
"<Time> MC#<ID> <Name>: Performing reset" |
|
■
|
"<Time> MC#<ID> <Name>: Waiting for connection establishment" |
|
■
|
"<Time> MC#<ID> <Name>: Connection was established successfully, version: <version>" |
|
Media Component Network Failure
|
|
■
|
"<Time> MC#<ID> <Name>: Network failure – device is disconnected" |
|
■
|
"<Time> MC#<ID> <Name>: Waiting for connection establishment" |
|
Media Component Software Upgrade
|
|
■
|
"<time> CM: New Cluster image file loaded, version: <version>" |
|
■
|
"<time> CM: SW upgrade process begin" |
|
■
|
"<time> CM: Initiating SW upgrade on MC#<ID> (current version: <version>)" |
|
✔
|
"<Time> MC#<ID> <Name>: Loading new version - <version>" |
|
✔
|
"<Time> MC#<ID> <Name>: Loading DSP tones file" |
|
✔
|
"<Time> MC#<ID> <Name>: Blocked from new DSP resource allocations" |
|
✔
|
"<Time> MC#<ID> <Name>: All DSP resources were released" |
|
✔
|
"<Time> MC#<ID> <Name>: Reset performed by the Cluster Manager" |
|
✔
|
"<Time> MC#<ID> <Name>: Waiting for connection establishment" |
|
✔
|
"<Time> MC#<ID> <Name>: Connection was established successfully, version - <version>" |
|
■
|
"<time> CM: SW upgrade on MC#<ID> failed (current version: <version>)" |
|
■
|
"<time> CM: Retry (1) SW upgrade on MC#<ID> (current version: <version>)” and then same messages as in Item 3 above |
|
■
|
"<time> CM: SW upgrade Stopped by the Administrator" - or - "<time> CM: SW upgrade Completed" |
|